5.3/4L80E Single Turbo Typhoon Build
- Thread starter cobra198
- Start date
eviltwin
"junkyard syclone"
Re: 5.3/4L80E Single Turbo Typhoon Build
It's been a while since I have been on here, been too busy with life in general but,
Cobra1987, Black Knight, and I were able to take the Ty to the track yesterday. I wanted to turn up the boost a little so I started slow to make sure my adjustments in the tune were spot on.... This is all on pump gas, no meth
Here are the runs in order...(these are all from memory)
12.9@110. 10psi 2.3 60ft
12.2@113. 12psi 2.0 60ft
11.7@115. 12psi 1.75 60ft
11.8@115. 12psi 1.8 60ft
And the last run of the day
11.39@119.88, 13.5psi, 1.75 60ft, 11.3 AFR, 15* timing, shifting at 6200
This is a new best for us! We couldn't have been happier and hope to even best that next time out. I don't think a 10.99 is out of reach with this truck with more boost
It's been a while since I have been on here, been too busy with life in general but,
Cobra1987, Black Knight, and I were able to take the Ty to the track yesterday. I wanted to turn up the boost a little so I started slow to make sure my adjustments in the tune were spot on.... This is all on pump gas, no meth
Here are the runs in order...(these are all from memory)
12.9@110. 10psi 2.3 60ft
12.2@113. 12psi 2.0 60ft
11.7@115. 12psi 1.75 60ft
11.8@115. 12psi 1.8 60ft
And the last run of the day
11.39@119.88, 13.5psi, 1.75 60ft, 11.3 AFR, 15* timing, shifting at 6200
This is a new best for us! We couldn't have been happier and hope to even best that next time out. I don't think a 10.99 is out of reach with this truck with more boost
blacktyaffair
Donating Member
Re: 5.3/4L80E Single Turbo Typhoon Build
Congrats! Can't wait to see a BigGun banner flying up soon.
Congrats! Can't wait to see a BigGun banner flying up soon.
eviltwin
"junkyard syclone"
Re: 5.3/4L80E Single Turbo Typhoon Build
Me too but that probably won't be for a while. I might be able to make it to the track in may but I got yelled at on that last run for lack of safety equipment so I don't know how it will go next time. 16psi should get us in the 10s I think on pump gas. We might try and throw a meth kit on it and up the timing abunch too.
Me too but that probably won't be for a while. I might be able to make it to the track in may but I got yelled at on that last run for lack of safety equipment so I don't know how it will go next time. 16psi should get us in the 10s I think on pump gas. We might try and throw a meth kit on it and up the timing abunch too.
Black Knight
I Glow Therefore I am
Re: 5.3/4L80E Single Turbo Typhoon Build
Thats not how I remember it.
Track person, "Hey your going to need to get a roll now."
Eviltwin, "Wait I ran an 11.39!!!"
Track person, "Yes, but you will need a roll bar."
Eviltwin, "Wait, but I ran an 11.39!!!"
Track person, "Yes, but you will need a roll bar."
Eviltwin, "Wait, but I ran an 11.39!!!"
:rotf:
Thats not how I remember it.
Track person, "Hey your going to need to get a roll now."
Eviltwin, "Wait I ran an 11.39!!!"
Track person, "Yes, but you will need a roll bar."
Eviltwin, "Wait, but I ran an 11.39!!!"
Track person, "Yes, but you will need a roll bar."
Eviltwin, "Wait, but I ran an 11.39!!!"
:rotf:
92AcademyPhooner
New member
Re: 5.3/4L80E Single Turbo Typhoon Build
Hey TYTILIDIE. Do you still have that 32 spline input shaft for the 4l80e? I live in the springs and met you at Red Robin that one time. My next step is to do the conversion. Just was still wonderin. Thank alot
Hey TYTILIDIE. Do you still have that 32 spline input shaft for the 4l80e? I live in the springs and met you at Red Robin that one time. My next step is to do the conversion. Just was still wonderin. Thank alot