crate engine
- Thread starter drd21968
- Start date
![Quickstop [UK]](/forums/data/avatars/m/5/5165.jpg?1570199786){kind=avatar}
Quickstop [UK]
Combating adversyty.
powercat6
Active member
Re: crate engine
This the only place I'm aware of:
http://www.sytyperformance.com/index.php?option=com_virtuemart&page=shop.browse&category_id=172&Itemid=69
other than that you would have to buy an engine from someone on here
Warmpancakes has some lower mileage engines just listed today; look here:
http://www.syty.net/forums/showthread.php?t=80712
my typhoon has locked up tight.i dont really want to have the block line bored.do any companies offer a crate typhoon motor.i have had no luck locating one.
This the only place I'm aware of:
http://www.sytyperformance.com/index.php?option=com_virtuemart&page=shop.browse&category_id=172&Itemid=69
other than that you would have to buy an engine from someone on here
Warmpancakes has some lower mileage engines just listed today; look here:
http://www.syty.net/forums/showthread.php?t=80712
13.robb
New member
TNPhoon
1of28
Re: crate engine
:repost:
http://www.syty.net/forums/showpost.php?p=839099&postcount=3
:rotf: :rotf: :rotf:
:repost:
http://www.syty.net/forums/showpost.php?p=839099&postcount=3
:rotf: :rotf: :rotf:
Quickstop [UK]
Combating adversyty.
Re: crate engine
I know very little but people have generally advised against Jasper engines on this forum.
I know very little but people have generally advised against Jasper engines on this forum.
Fighting5thSVT
Active member
Re: crate engine
I also have no experience with Jasper's, but I do recall not reading much positive feedback about them here with syty's.
I also have no experience with Jasper's, but I do recall not reading much positive feedback about them here with syty's.
drd21968
New member
Re: crate engine
awesome ,i think i will order it,$1,700 it is a direct replacement forged pistons and all.what in these engines other than the heads and forged pistons is different than a stock 4.3.its not worth the time and agrivation rebuilding my current motor for $1,700.will have it next week,they asked if it had press in or screw in studs.i will have to get the valve covers off,anyone have any input on this.
awesome ,i think i will order it,$1,700 it is a direct replacement forged pistons and all.what in these engines other than the heads and forged pistons is different than a stock 4.3.its not worth the time and agrivation rebuilding my current motor for $1,700.will have it next week,they asked if it had press in or screw in studs.i will have to get the valve covers off,anyone have any input on this.
BoostedSUV
Active member
Re: crate engine
Why do people even ask for opinions if they're going to do the opposite anyway? :dunno:
Why do people even ask for opinions if they're going to do the opposite anyway? :dunno:
drd21968
New member
Re: crate engine
the more i research this i dont think a crate motor is the way to go.my block is cracked and i need to find a block.does anyone know where a bowtie block can be found?i plan on keeping this truck so forged pisons and rods with a steel crank is my current plan.i really do apreciate the advice,this is my first typhoon.:tup:
the more i research this i dont think a crate motor is the way to go.my block is cracked and i need to find a block.does anyone know where a bowtie block can be found?i plan on keeping this truck so forged pisons and rods with a steel crank is my current plan.i really do apreciate the advice,this is my first typhoon.:tup:
drd21968
New member
Re: crate engine
the crank i looked at from scat is not a billet steel crank but much harder than stock $350.any sugestions on pistons,rods.what is the difference beetween a stock 4.3 and a typhoon engine.i assumed they had forged pistons from the factory.thats why i was unsure if my current engine was correct.
the crank i looked at from scat is not a billet steel crank but much harder than stock $350.any sugestions on pistons,rods.what is the difference beetween a stock 4.3 and a typhoon engine.i assumed they had forged pistons from the factory.thats why i was unsure if my current engine was correct.
Quickstop [UK]
Combating adversyty.
Re: crate engine
forged from factory = nope
get SRPs or TRW or some nice JE pistons
may as well throw in some eagle rods and get 4 bolt mains with the hardened crank then you don't need to upgrade the lower end if you want to run it harder.
forged from factory = nope
get SRPs or TRW or some nice JE pistons
may as well throw in some eagle rods and get 4 bolt mains with the hardened crank then you don't need to upgrade the lower end if you want to run it harder.