Factory Keys

TurboManiacal

Donating Member
Can I e-mail my vin for factory keys to a dealership (i.e. dal)? I've only got the one set and I don't like the looks of the wear and tear on them. That and I had heartattack yesterday after I came home after working 15hrs and saw them lying in front of the garage door (apparently all day long) where they had fallen out of my pocket.
 

Falco

Donating Member
Ryan,

These keys are not rocket science. Since my original ones were tired as well, I've ordered two sets of uncut keys from a guy on ebay. It was like $19 for the two sets including shipping to Hungary. Next I take my original keys and the uncut ones to a kemaker, who reproduced the keys in half an hour. They are perfect.

BTW, you are living in a peacful area... :wink:

Later,
 

TurboManiacal

Donating Member
Eh, I know the keys aren't rocket science but I wouldn't mind having keys cut to the original standard not "copies" per say...not that that isn't acceptable should this route not pan out.

"peaceful area" eh...on day had a coffee mug (dirty) that I left outside stolen....why would you want a dirty plastic coffee mug. Even if the keys were picked up nothing much coulda come of it right away as the truck is on post I couldn't for the life of me get it to stay started today. Good thing I have a battery & engine enroute. 8)
 

peterpaw

New member
original keys

original keys

hi there,

the way to get an original key cut is to go to a locksmith with the key code number. find one that has a "Curtis key machine" that cuts original notches

the number is stamped on the outside of the lock cylinder. if your door is the same as the steering column, take the lock out of the door and find the number.

the truth is that the locks are so sloppy on the single sided GM keys that all kinds of misfit keys will operate the locks.

used to be we'd keep a ring of old keys and we could usually find one that fit if we lost the key for 50's to 70's GM cars.

in a effort to defeat the bad guys i remember re-keying a lock with a very high combination of pins (almost no cuts, just one deep one) in this way it looked like a blank with one notch. there are no keys from GM like that and any worn key would be farther, not closer to that combination. if you did that you would have to find a locksmith willing to do that work and have the old style pins and then you would have to go to the trouble of removing and re-installing the cylinder in the steering column.

Probably not worth the trouble

peter
sy
zr2
 

Loeryder

New member
Is there any way to convert all the lock cylinders to dual edge keys?

If there was something that used the same dimensions maybe we coudl just swap the cylinders.
Just an idea for added security.
 

phoonTy

Truckless. For now.
I don't know what the previous owner of my Ty did, but no key I have will work on my door locks. The only way to get in, is with the keyless entry from the alarm. I don't know if they're dummy locks, or he just swapped em out of another s-series for the reason of safety. it's weird. But I'd like to get a set of original keys too. Let me know what you find out.
 

peterpaw

New member
Keys

Keys

hi there,

1. it may be possible to convert the doors to double side keys but probably too much trouble for too little reward. door locks only stop the honest people. given a slip jim or for the more vulgar, a large rock. the door or window yields.

the real vunerability is the ignition lock. there is available medico key replacement cylinders for ignition locks. this stops the slammer theives and the key cutter thieves. it will not stop those that destroy the steering column.

2. if you dont have the key to the door locks, take off the inner door panel and the cylinder is held in with a single clip that slides into a groove on the sides of the cylinder. it will also have a clip that connects to the rest of the lock system. you should find the key number on the outside of the lock....then off to your happy automobile locksmith.

3. your lock question addresses the real problem that i have owning a syclone. it is a thief magnate.

peter
 
Top