So what do ya guys think?

spooldup

Super Member
Just about done. It's been bellmouthed, and tapped for aquamist. I figured if i was in there i might as well do it all. Anyway here it is...

polished%20ic.jpg



Does anyone know if anything will happen that would be detrimental if i put this in an oven at about 350 for an hour? I plan to clear it to protect it and it needs to be baked.
 

spooldup

Super Member
Can you see it now? Yahoo sucks! The pic was up for about 20 minutes and then it went to a red x. I need to find somewhere else to put my pics. I hop you guys can see it, i can.
 

Phoon30

New member
i can see it. it gets the ::eek:k:: from me. i like how ya placed it on a pillow. Llke you didn't wanna harm it or something. :lol: give us some details. how did ya go about polishing it.
 

spooldup

Super Member
Typhoon #1133 said:
:eek:

Dam that thing looks good!!!! You did a geat job!!!! Must of took you all winter to get that done.

You are not too far off. I was only able to work on it here and there so it took a long time. As far as what or how i did it that's a long story and alllllottt of money on machines and compounds in hopes of eventually providing an AFFORDABLE service to everyone and making my engine shiny. :D The shops want allot of money but i guess when you break down the man/overhead hours it's fair. The shop over here wanted 650-750 to do what i did. I spent way more on startup costs but i figured it would pay for itself the more i did to my motor. So far i did my alternator, stock turbo, and the top to my wastegate. I just started my a/c lines today and did the cap for the ic. Would any of you guys be interested in having something done? I wanted to get at least the ic up so you can see what i can do. I figured before i said anything about offering a service i would throw something up here for some feedback. I really try hard to create a nice finish. I'm very picky. I would stand behind my work too. If you didn't like the way it came out send it back to me and i would try my best to correct it and make it right. Here is the best advice i can give. The more time you spend prepping the piece and keeping it hot the better it comes out in the end. Thanks for all the positive feedback. It feels good in the end hearing that! :p
 
Top