Wheel choice Woa's!

JAY

Donating Member
Re: Wheel choice Woa's!

Cheaper here: http://cgi.ebay.com/ebaymotors/ws/e...STRK:MEWA:IT&viewitem=&item=280136028949&rd=1

01e4_1.JPG
 

Bump Stick

Get me the BIG hammer
Re: Wheel choice Woa's!

Those are bad ass rims. The look sweet. I might look into a set of those for my SY. dont worry I am now were close to you LOL so you wont be kicking me in the nuts
 

NOJIMMY

New member
Re: Wheel choice Woa's!

dgoodhue said:
If you used the 8.5 Rims the offset would only off in the front by ~12 mm or 1/2". IMO that is fine. The 9.5" rears would be off by 25 mm from factory or 37mm from the fronts. I would just use an 1 1/4" or 1 1/2" spacer with those.

[hijack]
I feel really dumb, as I can not get the math to work out (but its gotta be me....sorry)
If Wheel Front Spacing = (width * 25.4) /2 + offset, so for front stockers
(8 * 25.4)/2 + 41mm offset
= 101.6 + 41= 142.6mm front = 5.6in

so (8.5 * 25.4)/2 + 35mm offset
= 107.95 + 35 = 142.95mm which seems to be a perfect fit.

Given the backs
(9.5 * 25.4)/2 + 35 mm offset = 155.65mm rears
versus for stock (8 * 25.4)/2 + 13 mm offset = 114.6mm
155.65 - 114.6 = 41.05mm = 1.61 inches (which is close to 1.5" spacer)
41mm - 38mm = 3mm difference with 1.5" spacer which is nothing.

Is there a 1/2 lip on these aftermarket wheels that Im not accounting for?
If so then wouldn't the fronts be off this amount and the backs as well with a spacer?
[/hijack]
<if it matters any, I hesitated to asked feeling really stupid>

-Larry
 

43t_ftw

Member
Re: Wheel choice Woa's!

after looking at my truck with stock wheels i decided that those first wheels would stick out too far and look bad,
stock the wheels sit pretty much flush with the cladding, those wheels would stick out another half inch and look retarded imo.. i cant stand wheels that stick out too far!

So i ended up ordering a set of hyper black C6 Z06 rims, was going to go chrome but thought it would be too much bling for my liking lol :lol:
 
Top