Search results

When I pop the hood on my truck there is a lot of air blowing out from around where the turbo is. Is this normal like its coming from the wastegate or is it not supposed to be blowing out like that?

I started trying to figure out my Tunerpro log and at 3325 RPM I have 125.93 KPA (wich converts to 18+ PSI?). I'd have to say thats overboost and what should I do/check

http://videos.streetfire.net/video/The-GMC-Syclone-story_719377.htm found it on streetfire never I've never seen i before

I got tunerpro and the cable and logged my truck. I foud that knock is 0 degrees steady through the rpm's until about ~3000-3500 when it jumps to about 8-10 degrees then goes back to 0. Could someone help me post it and take a look for me? I'm not so sure what to look for yet. Thanks

Got the timing set and the truck idles perfect. ran great in the driveway so i took a slow and easy road test to see if it was good, but when i gave it gas it would stumble ridiculously. I replaced the oil pressure sending unit and had to remove the distributor while it was apart i added the...

I'm trying to set the timing on my Sy. I unplugged the tan/black wire but when i set the timing at 0 degrees the truck cuts off and won't run. What should i do to get the timing set correctly?

was thinking the other night and was wondering if anyone could make a sticker with my username on here and syty.net under it for the location that the GMC TRUCK sticker would go on the tailgate ?

I took out the dash and fixed the wrapped oil pressure gauge and noticed that 2 light bulbs were missing (circled) i went to the dealership and they can't get them apparently so does anyone have any or know where i can get a couple of them ? thanks for the help

LMC magazine sells colorbond paint that says it matches the interior has anyone used this paint on dash bezel im going to reset the oil gauge and would like to paint it but want to make sure the color wont be off at all or if it is where i can get one that does match exactly. thanks

I have the 2 side rails that came with the truck but no other tonneau cover parts make an offer

this hose is not attached to anything this is how i purchased it it splices off of the small hose connected to the cruise control module and is right behind the EGR

how do you get the manual window roller off a non power window truck

so i fixed the old droopy headliner and added some rubber backing on the board it looks great but the visors are pretty faded any remedy for this or only a new pair of visors?

its the last cladding peice i need its for the driver side on the bed would prefer an unbroken peice with all tabs

I,m taking the steering wheel assembly off to try and tighten the slop on the steering wheel because it moves in its joint where do i go from here http://i305.photobucket.com/albums/nn219/graham1524/Truck%20build/DSCF1045.jpg

http://i305.photobucket.com/albums/nn219/graham1524/Truck%20build/DSCF1015.jpg http://i305.photobucket.com/albums/nn219/graham1524/Truck%20build/DSCF1016.jpg http://i305.photobucket.com/albums/nn219/graham1524/Truck%20build/DSCF1024.jpg took all the cladding off and to my surprise there was...

first one ive seen for sale anywhere near me http://raleigh.craigslist.org/car/687330827.html

what would i need to run a 412 cam on a basically stock rebuild not looking for excessive power but would like a little gain and reliability would the 412 be the correct cam to go with also would the 412 for sale through RPM work with a non-roller setup

might be going to Dolly Wood and staying in pigeon forge next weekend anyone in that area wanna let me check out there truck not bringing mine i go every october and last year saw 2 ty's not sure whos they were

air dam with foglight cutouts for sonoma $50 driver side front wheel arch 2 broken tabs looks fixable $75 front bumper support needs repair havent attempted to fix it $40 red gmc letters look reuasable $10 bumper off a regular sonoma $50 not sure how pricing is will take pictures upon...