Search results

The aft lower passenger one is going bad and clunking. If the diff has to be removed just to replace it, I may as well change 'em all. Anyone change these and are they press-in/press-out like control arm bushings? They look like control arm bushings. (I believe the LMC truck catalog shows the...

I got tired of using silicone to patch the cracks on the silly stock plastic intake tube. The last straw was finding a broken end/piece(about the size of a 3" hose clamp) of the tube lodged in the orange turbo intake hose. I was lucky it didn't get lunched by the turbo. Of course I had to buy...

I've got HID's installed in HELLA H4 housings and my "color output " looks more "Blue". Is this a function of the Housings' LENSES or is it the bulbs themselves? I know there's 4300K bulbs/capsules, 5000K bulbs etc....and the 4300K's are supposed to look more like "white". Anyone know if...

anyone know if the Turbo Buick IAC (GM# 25527077) would be a possible replacement for the SyTy one (GM #17112193) ? A friend has a spare and I hope this is a good swap! Terry

FWIW..... I finally got these mounted. The 17x9.5's all around. Yokohama AVS ES 100's: 275/40WR17's. 1.25" spacer/adapters for rear. Wish I could put 'em up here but they're at Sony's Imagestation: http://www.imagestation.com/album/?id=4285902853

I'm in the process of replacing axles with the A1 Cardone P/N 60-100 lifetime warranty ones. Did the driver side...as I was about to install the passenger one I (FINALLY) :roll: noticed that the ORIGINAL FINE-THREAD nut won't thread onto the New COURSE-THREAD half-shaft spindle !:evil: WTF? I...

Izzat the wire that goes to the intake manifold bolt behind the alternator?

If ya don't wanna take your old one in to be rewound, ya might wanna check this out. This guy is straight-up with great service. First one he sent me was clocked 120 deg. off...he sent me money for the return and he ate the shipping for the correct one that I just received...

Yeah my Fuel pump pulsator/damper was tossed long time ago but I know the rail knocking has been there prior. I had remembered there was something causing the rail knock but forgot what it was. Anyone know? I has installed an Auto Meter fuel restrictor just after the rail fitting. A braided...

I've had an SPW Industries 7000k H4 Hi/Lo kit installed in Hella Euro H4 housings for a while now. Anybody know what exactly determines the "color in the light spectrum" we actually see from the bulbs? Mine look blue. :roll: Tired of seeing blue. What I gotta do/change to make 'em look more...

My attempted search on these went UGLY. :roll: My original outer ones are starting to rip/leak. All 4 of 'em are the ORIGINAL at 127k miles. I'd LOVE to replace all 4 with ORIGINAL material/style ones and not the crappy/cheap auto part store replacements. CarParts.com lists: FWD Shaft...

My attempted search on these went UGLY. :roll: My original outer ones are starting to rip/leak. All 4 of 'em are the ORIGINAL at 127k miles. I'd LOVE to replace all 4 with ORIGINAL material/style ones and not the crappy/cheap auto part store replacements. CarParts.com lists: FWD Shaft...

Smelled raw fuel at start up. Check around and see the area near the SPECIAL Torx screws, on the forward half of Accufab is wet. Sure enough...fuel leak. Thought it could be disassembled...WRONG! The pins in the SPECIAL Torx screws have pins preventing the Torx insert/tool from entering the...

Yikes! Summit Racing sells the 3/8" dia. at $7.39/foot. Anyone willing to tell where to get it at a better price? I wanna sleeve my Accel plug wires ASAP! TIA

Anyone know info. regarding the aftermarket types which sill replace the original? I had seen some in the Summit catalog but will these be compatible? I would greatly appreciate comments/suggestions. Terry

Anyone know info. regarding the aftermarket types which sill replace the original? I had seen some in the Summit catalog but will these be compatible? I would greatly appreciate comments/suggestions. Terry