Search results

Re: 1993 GMC Typhoon Stock Intake wanted, maybe you have converted and want to sale y I sent you a pm. Let me know ��

Re: How to make a fuel pump Hotwire kit Can you post some pictures of the kit or maybe look at the relay and tell us where each wire on the relay goes to. Be specific, relay will be marked 30, 85, 86, 87, 87a. 85 and 86 turn the relay on and can be smaller wires, 30 and 87(a) carry the high...

Re: Holley HP install and tips Randy is correct that these sensors are not required for operation but they are nice for data logging purposes. I used the 558-105 harness so mine did not come with any terminals on it, so no I did not use the holley terminal. You can just unpin the signal wire...

Re: Holley HP install and tips For fuel pressure I tapped into my autometer electric gauge. All you need to do is tap into the signal wire of the sending unit then wire to an input on the dominator. I believe autometer sends 12v to the sender double check that and wire to an appropriate input...

Re: Distributor with Hall Effect trigger Hi Denny, I'm not sure what exactly you are wondering about and I'm not the best at explaining this stuff :rotf: But what you found on google is correct, here's what I believe you need to do. Setup your crank sensor, then rotate engine to 70* btdc. Now...

Re: Midwest Sy Ty Meet July 16th at Volo Auto Museum Hey 69gtojeff where in se wi are you? Andrewb and I are planning on leaving the franklin area with his typhoon around 8:30, probably a little later since we have to do a car seat install in his ty before we can leave :D It would be nice if...

Re: Distributor with Hall Effect trigger Hi Denny, I'm not sure about setting up a cam sync on bs3 but here is the instructions for a holley setup. http://forums.holley.com/showthread.php?2590-Magnetic-amp-Hall-Effect-Crank-Cam-Sensor-Setup Most cam syncs are a 1x sensor, that is what the...

Re: Holley dominator and stock trans Or use the holley to control the tcc just like stock. Its relatively simple to setup and the very nice part is Randy Merritt already laid the ground work for it so its a no brainer on how to do it. Look at his thread in the chipping forum, he has a lot of...

Re: Distributor with Hall Effect trigger Yup the vortec dist cam sensor is a hall effect, nice part is you can go to a junkyard and find one for cheap. I am not positive but I believe the cap efi connection sells will fit on it so you won't need to use the stock dist cap to cover the sensor. I...

Re: Distributor with Hall Effect trigger Can you use a stock 96-up distributor? I use that for my hall effect cam sync with my holley dominator. I'm assuming you just need a 1x cam sync. If the height of it won't work your setup its possible to grind off the stock mount and then add an...

Re: What's a guy gotta do A disk is not required to use datamaster. Back in the day I downloaded the trial on tts's website, I then purchased the software through an old syty vendor that is no longer in business. He sent me an activation code, I typed that into my trial version and boom I had...

Re: Rear suspension I would go with, hitting bump stops, shocks are bottoming out, sway bar is hitting or loose. If its been doing this for sometime get underneath the truck and check for wear marks. Check the bump stops and u bolts, frame, sway bar for shiny metal or rubbed looking parts. If...

Re: Dash Swap - Asking for Help Identifying Harness Connectors Looks like a fun project :) The first is the cruise control, that end is quite odd looking, the other end is a square 4 wire connector I believe white in color. Someone will correct me if I'm wrong :D That one always gets me...

Re: Carpet Replacement Hi Nick I bought carpet from lmc for my sonoma gt years ago and it is in fact acc brand. At least it was when I bought it because it came in an acc box. I believe I went with black in the sogt and it looked great! I would highly recommend acc as the carpet was heavy and...

Re: 10sec Engine Shortblock (Finally) I agree with Z Ski definitely do a half fill if you plan to run all out. With that make sure you run a good oil cooler and have a good cooling system. I have not driven my syclone much yet as I haven't had a lot of time to devote for it over the years but...

Re: Typhoon 1892 Holley EFI Dominator Installed and working great If I bought a stock truck I would do the same thing, throw a dominator in it and leave the factory harness there. My reasoning would be it will drive better and be easier to adjust the tune. If I were to mod the truck it would be...

Re: Starter recommendations I replaced a bad 6492 starter ( ls version of the 6449 ) at work the other day so I took some pics of the internals. I also had the opportunity to take a couple pics of a denso starter my dad has for his typhoon. The denso is very nice because of the adjustable...

Re: Starter recommendations Here is the best I can come up with at the time for the gear reduction part http://bloozeown.weebly.com/uploads/4/8/2/3/48239669/8321288_orig.jpg From what I remember my dad said the gears are pretty small in the gm ones, they do blow up from time to time. I would...

Re: Starter recommendations Sorry I just reread my post and wanted to clarify a couple things. The 6449 starter is the same between a 305-454 there is no difference internally they are all just a factory gm gear reduction starter. It seems a lot of people think you need the 454 one when in...

Re: Starter recommendations I get a kick out of this every time people say it has to be a 454 3500 truck. These starters came in the 96-98 1500-3500 trucks with the 5.0-7.4 engine. The common number for it is a 6449. There may be extra letters tacked on to the number but that all depends on...