pics of my sy #2695
- Thread starter choffert1
- Start date
choffert1
New member
Re: pics of my sy #2695
the frt wheels are 18 by 8.5 with a 56mm offset with a 255/40r18 bfg kdw2 and rears are 18 by 9.5 with a 40mm offset with a 295 35r18. the wheels are set in 8mm all the way around will need a spacer if i want them in the to set out to factory. the frt wheels were shipped wrong, they sent 17's instead of the 18's thats why the frt is not pictured
the frt wheels are 18 by 8.5 with a 56mm offset with a 255/40r18 bfg kdw2 and rears are 18 by 9.5 with a 40mm offset with a 295 35r18. the wheels are set in 8mm all the way around will need a spacer if i want them in the to set out to factory. the frt wheels were shipped wrong, they sent 17's instead of the 18's thats why the frt is not pictured
choffert1
New member
Re: pics of my sy #2695
sy is getting ready for some new parts.
the new brakes 13inch fronts from baer and ls1 rears with baer rotors and new frt wheel bearings
truck is going for paint soon. new cowl hood, new grill from lmc with a billet insert(was not going to cut the factory one)
sy is getting ready for some new parts.
the new brakes 13inch fronts from baer and ls1 rears with baer rotors and new frt wheel bearings
truck is going for paint soon. new cowl hood, new grill from lmc with a billet insert(was not going to cut the factory one)
Re: pics of my sy #2695
Could you try to post the phitcures again...?
I'm looking into getting new wheel for my sy since I also is going to mount 13" brakes on it this winter... Been driving it on the track with the stock breaks and that not good at all..!!!!
So would be nice to see another sy with the same setup....
Mikael
Could you try to post the phitcures again...?
I'm looking into getting new wheel for my sy since I also is going to mount 13" brakes on it this winter... Been driving it on the track with the stock breaks and that not good at all..!!!!
So would be nice to see another sy with the same setup....
Mikael
SecondTurbo6
New member
Re: pics of my sy #2695
Looks good.
What happened to the center caps in the first pic?
Looks good.
What happened to the center caps in the first pic?
alwayscode390
pppssssshhhhhtttttttttttt
Re: pics of my sy #2695
Those are going to be the new popular wheel I think for the SYTY crowd ---
Those are going to be the new popular wheel I think for the SYTY crowd ---
choffert1
New member
Re: pics of my sy #2695
i left them out because i need to trim the cv shaft down so the center cap will fit. just doing mock up right now. truck is going for paint in a couple of weeks, but i do have the tires mounted and balanced now.
i left them out because i need to trim the cv shaft down so the center cap will fit. just doing mock up right now. truck is going for paint in a couple of weeks, but i do have the tires mounted and balanced now.
choffert1
New member
Re: pics of my sy #2695
i think so too, but they do look Bad Ass. i know corvette wheel are being over done, but they are cheap and look good.
i think so too, but they do look Bad Ass. i know corvette wheel are being over done, but they are cheap and look good.
T-Bone
Active member
Re: pics of my sy #2695
To me, wheels always set a vehicle apart. These particular wheels do not impress me at all. I will have to wait until the Baer's are behind them and then re-evaluate but for now, I have seen much, much better looks. Maybe it is just me, but the stock wheel appearance is hard to beat. I know they are not compatible with brake upgrade packages though.
To me, wheels always set a vehicle apart. These particular wheels do not impress me at all. I will have to wait until the Baer's are behind them and then re-evaluate but for now, I have seen much, much better looks. Maybe it is just me, but the stock wheel appearance is hard to beat. I know they are not compatible with brake upgrade packages though.
alwayscode390
pppssssshhhhhtttttttttttt
Re: pics of my sy #2695
I guess I was basing that statement on the fact that the corvette wheels ALWAYS come out with reproductions and are cheap, big, and wide.
Sorta like the older zr1 and z06 wheels were the old popular "upgrade".
I wish the Sportmachines wheels were a little cheaper because honestly those are my favorite too ... keeping with your point of the ORIGINALITY. Thats what will keep them exclusive though
---
I guess I was basing that statement on the fact that the corvette wheels ALWAYS come out with reproductions and are cheap, big, and wide.
Sorta like the older zr1 and z06 wheels were the old popular "upgrade".
I wish the Sportmachines wheels were a little cheaper because honestly those are my favorite too ... keeping with your point of the ORIGINALITY. Thats what will keep them exclusive though
---SecondTurbo6
New member
choffert1
New member
Re: pics of my sy #2695
yeah those sportmachine wheels are sweet
I guess I was basing that statement on the fact that the corvette wheels ALWAYS come out with reproductions and are cheap, big, and wide.
Sorta like the older zr1 and z06 wheels were the old popular "upgrade".
I wish the Sportmachines wheels were a little cheaper because honestly those are my favorite too ... keeping with your point of the ORIGINALITY. Thats what will keep them exclusive though
yeah those sportmachine wheels are sweet
