Search results

Re: 92 ty 2031 Part Out as long as it works you got it paypal? pm me the info thanks

Re: 92 ty 2031 Part Out not sure I can't find one anywhere. The one for the 94-03 are $80 new

Re: 92 ty 2031 Part Out does the actuator for the rear glass work?

Re: RPM Stage 3 Turbo (Polished Housing) & Accessories (Oil drain tube + Elbow) pm sent

Re: Corvette c6 rims yea that is what I was thinking but nothing on those sizes worked right. I have 255/40 18 and 295/30 19 both at 26"

Re: Corvette c6 rims I just looked it up and the closest sizes I could find to match the diameter are 245/45R17 25.7" 245/40R18 25.7"

Re: Corvette c6 rims I put staggered corvette rims on mine it is just a pain to find the correct tires to get the same diameter.

Re: endgate actuator Ok I checked the voltage and got 12v, I hit the ty with a hammer :rotf:,I mean the actuator and still not working. So I tried the junk yard one, hit it with the hammer and nope. I guess I need a new one or the rig up a door lock actuator of some kind??

Re: endgate actuator I will give it a try. Is there a way of getting them rebuilt?

Re: endgate actuator There are parts on these trucks that don't usually go bad???:squint:

Re: endgate actuator single wire plug bolts through gate for ground

Re: endgate actuator There is power there it is pulling, it just isn't strong enough to pull the latch anymore. The one that I pulled at the junk yard is the same way. Was working fine just all of a sudden just won't pop the glass

Does anybody know where I can buy one? I picked one up at the junkyard and of course it doesn't work either. I have looked through LMC, EBay and several other places and no luck. Any Ideas? TIA

Re: Should I space front and rear or just rear? I looked into a bunch of different take-offs and alot of the BMW wheels will make the fronts stick way out

Re: Should I space front and rear or just rear? I believe that mine are the 10 inch rears and I need the spacer

I waited to buy adapters to see how it looked. I was thinking I would just get 1inch for the rear. According to the offset calculator they are 9mm in on the front and and inch more in the rear. Let me know what you think...

Re: Everyone in the Southeast Safe? Nothing down here in Fl. Just a little wind!!!!

Re: Driver side front Wheeit l Flare I just used some sheet metal (aluminum strips) and bent to fit. I'm going to be replacing the arch so wasn't to worried about the holes but there are just a few on the bottom side.

Re: syty drivetrain in a jeep???? He wants it to have enough power and traction to launch a boat off the beach

Re: syty drivetrain in a jeep???? He doesn't want to use the turbo setup just the tranny trans case and axle setup