Search results

I was wondering if the A/C wiring harness is just for the A/C? trying to get rid of some wires and was wondering if I can just un plugg (looks like just behind the distributor) and be done with it or is there some more important wires in there? I did search but didn't come up with anything...

After being down for about 6 months, I finally got it running. I broke the ring lands on number 4 cylinder and rebuilt the motor. I put forged pistons, the machine shop went through the block and crank. I didn't get anything special done, just your basic rebuild. I am pretty excited about...

just wondering if someone could tell me how to install the freeze plug behind the cam shaft, or actually if there is a measurement it should be set to. I haven't been able to find out the info , probably not looking hard enough. Thanks ________ SCUDERIA FERRARI

Hello everyone, I am about ready to start my first engine build for my sy. Wake up this morning about 4 am and am bored so I decide to go tinker with the truck. I haven't really been driving it alot lately because of snow. Check the oil and there is anti freeze in there. Must have happened the...

I made it to the track again, and set my personal best. I ran a 8.666 at 79.63 on a 1/8th mile track. I am still learning the boost launch and getting a little better everytime. :) I know there is some more in the truck still tuning and working on it. THANKS Dig.. :tup: Just wanted to tell...

Just thought I would share some pics of my truck. Let me know what you think. :tup: ________ Jaguar Mark V Picture

I was wondering if my duty cycle wasn't running any higher then 6, using DataMaster, then I turned the fuel pressure down 4 pounds, did another run and duty cycle was at 60, do I then turn the pressure down again to get it at 80? I am confussed and having alittle difficulty with fuel pressure...

I know this has been talked about, I did search and read 60 some pages and just confussed myself more. I can get a 1993 4.3 for $150.00, my plan is to strip this block and rebuild it for a spare for my Sy. Using only the block and heads from the 93, and using everything else from my original...

Excuse my ignorance, but there are 2 ports on the plennum, on pass. side towards the rear, they are pretty big. I was wondering if anyone know's if they should be blocked off or what. They are behind the "butterflys" if anyone knows what i am talking about. Thanks for your help ________ Hotels...

hey everyone I have a strange problem, i am getting boost in park, just reving up the motor and it will boost. I did the normal tune up and found a problem where it looked like my fuel was cutting out at high rpm, so i thought that i might have messed up a vac line, so i replace the vac lines...

would someone be willing to take a look at a dm file and tell me what is going on. I recorded it just driving around, trying to get a little understanding of what to look for and what I am looking at. still trying to figure out how to post it. thanks rik :lol: ________ KADETT

I have this extra chip, got it when I got the truck. I was wondering if anyone knew what kind it is. It says Superchips on it, and someone has written A4BMNBL.B with the numbers 1143-2096 on it. Does anyone know? Thanks rik ________ WILLIAM B. MAYO

Is throttle cable the same on Sy as any other PU? I have a part # 15637756 is this the right one? thanks rik ________ OREGON DISPENSARY

I went racing for the second time, didn't do bad. I am ordering Datamaster, going to take a head first dive. Need to make it faster. Here are my times. Reaction---.1201 60 ft.---2.1090 1/8 ET---9.1977 1/8MPH--76.15 going to get the datamaster and see what to fix, and start there. ________ GAUNTLET

I went out to the 1/8th mile today. Didn't do as bad as I thought. Here are the numbers. Reaction.....3021 60 ft....... 2.3779 1/8ET...... 9.3750 1/8 MPH.. 75.49 this was the first time I raced this truck, just bought it last weekend in fact. Had a great time. Thanks Chargerman for making...

Hello everyone, just wanted to say Hi and intorduce myself. I just got a sy and am loving it. I am sure I am going to have alot of questions down the road. ________ Maxxcab