Search results

140 in the sy is nothing like 140 in my wife's supra. fast forward 2 years. sy's back on the road with much work. poly motor mounts, billit 9/11 conv., full hartman trans, moroso sfi flexplate, new rubber trans mount and running for now w/o the under engine wind deflector. those are the only...

if i've got my stock chip/turbo/manifolds/injectors on with no alky and 46lbs fp(a little rich) how come on a dm file i took today wot 0-100mph, my afr was around 11.7 but my injectors never went oner 88%dc. why wouldn't the comp. just pull out some fuel to get the afr closer to 14.7? Jeremy

Re: Full manual valvebody never even thought about the full tv on the manual vb. Thanks, Jeremy

Re: My new tranny cooling set-up (Let me know what you think) you'll be fine. Jeremy sy2185

Re: Full manual valvebody sure, quicker as auto, but more fun as manual? plus, C02 shift solenoids can handle the 1-2 and 2-3 shift just as quick as an auto, and i'm sure if need be I could slap the 3-4 shift. my home track is 1/8 mile anyway, so that'd be rare. What drilling were you...

My HHP stage IV w/3200 stall 9/11 shifts like a dream in d&od, but the real treat is manually shifting it.Assuming the b&m pro bandit shifter being installed right now is user-friendly, I'm thinking pretty seriously about going full manual. I know I'd prolly have to run a 2-stage air shifter so...

Re: Tranny temp manifold / filters Yeah, that's the one. I can't remember what pitch the thread is going into the manifold, but yeah, switching them out is easily done. I swapped mine for -6an ends. You keep mentioning the word "kit", though. None of these items is any kind of vehicle specific...

Re: My new tranny cooling set-up (Let me know what you think) what's in your trans, and what stall/size conv. do you have? JEREMY

Re: Tranny temp manifold / filters http://store.summitracing.com/partdetail.asp?part=ATM%2D2286&N=%2D131448&autoview=sku as for the housing, they're not sold drilled by summit anymore. try earl's performance products: http://www.anplumbing.com/shop/exact link...

Re: changing fuel pressure for smog check Have a "hook up". My guy said he'd forget visual violations(except egr&pcv) but as a what if I asked him what else it'd fail for and he said AFPR, ATR intake,and aftermarket throttle body, but he missed my 42mm Tial ext. WG on the x-over pipe and...

Re: Tranny temp manifold / filters sy2932: "What remote filter and trans temp sender are you using? All the remote filter set ups I have seen are drilled and tapped for 1/8" NPT senders. As you can see here on this extra Summit remote filter housing that I have, there is plenty of clearance in...

Re: changing fuel pressure for smog check just got back from failing my first try. I ran w/29lbs fp, 160F thermostat,no egr or pcv valve. Truck was good and hot when tested. I passed all but my idle Hc. allowed is 120, I was 177. But on the 2500 rpm Hc test allowable was 180, i tested 11. I'm...

How many amps is the stock alternator? Jeremy

Re: changing fuel pressure for smog check how low did you go? Jeremy

I've got a mech. herew in san diego that'll ignore my visual violations if the truck passes the sniffer test. I plan to crank down the fuel pressure literally on the side of the shop before I pull in. My question is how low to go? It's not a dyno style rolling test b/c of the awd, and I'll have...

Re: TCC shudder that isnt... need some help I've got a purpose-built gauge on the trans pressure test port now w/a 10' hose leading into the cab for TV setup. Maybe available here: http://www.bowtieoverdrives.com/index.shtml These folks built my stage IV hartman trans and ran it on a tranny...

Re: Tranny temp manifold / filters used a pressure guage off the trans pressure port for start up as well as verifying the tv was setup properly(ie checked press. in p,r,n and each gear w/tv at max,disconnected and connected at idle) but a Ml/sec flow test through my mocked up cooling system...

Re: SoCalSyTy Meetings for 2005, Next One Saturday Feb 5th 2005 my sy's back on the road. when's the next meet? Jeremy

Re: TCC shudder that isnt... need some help out of curiosity, what's the testing procedure w/guage to indicate real TCC shudder? Jeremy

Re: Tranny temp manifold / filters I have a small fluid manifold just after my b&m resevior and before my remote filter. I ended up using it b/c the temp sender I'd planned to install in the remote spin on housing was restricting fluid by protruding too far into the full flow chanel inside the...