Parts fer sale @ CARLISLE
- Thread starter gary sy
- Start date
Re: Parts fer sale @ CARLISLE
Well if its 75 percent there I think it will work . CAN you send me a pic Nick .:tup:
How rusty can it be?
Well if its 75 percent there I think it will work . CAN you send me a pic Nick .:tup:
Cronic fatigue
toe cutter
Re: Parts fer sale @ CARLISLE
Off the top of my head:
New pte 6266(still in box)
Renz-fab side facing upper intake.
Stock lower intake
Ty fuel rail
Stock 2-front,2back wheels(no center caps,need refinishing)
Bunch of other parts also.
I'll have to go look and see what else in the hoard must go.
Off the top of my head:
New pte 6266(still in box)
Renz-fab side facing upper intake.
Stock lower intake
Ty fuel rail
Stock 2-front,2back wheels(no center caps,need refinishing)
Bunch of other parts also.
I'll have to go look and see what else in the hoard must go.
"Nickel"
S-Series Syco
Re: Parts fer sale @ CARLISLE
Looks great just what I need!:tup::tup: I need more guys
Looks great just what I need!:tup::tup: I need more guys
mattw
Active member
Re: Parts fer sale @ CARLISLE
I have a 1992 4.3 block with heads. The block was in my blazer before I did a V8 swap MANY years ago. The block ran fine when pulled but has sat(inside on a stand) for years. It would make a good candidate for a complete rebuild. It is a standard bore block and there has never been any internal work done to it.. IIRC it has around 150k miles on it. It has no intake or oil pan. I'm quite sure that the ONLY difference between this and a sy/ty block is the pistons. I'm also very sure that the block, crank, rods, etc are all reusable. I've held on to this hoping I could find a sy/ty wtih a blown engine, do a budget build on this block, and drop it in that truck. That truck never showed up and this thing is taking up space... $150 OBO
I have a 1992 4.3 block with heads. The block was in my blazer before I did a V8 swap MANY years ago. The block ran fine when pulled but has sat(inside on a stand) for years. It would make a good candidate for a complete rebuild. It is a standard bore block and there has never been any internal work done to it.. IIRC it has around 150k miles on it. It has no intake or oil pan. I'm quite sure that the ONLY difference between this and a sy/ty block is the pistons. I'm also very sure that the block, crank, rods, etc are all reusable. I've held on to this hoping I could find a sy/ty wtih a blown engine, do a budget build on this block, and drop it in that truck. That truck never showed up and this thing is taking up space... $150 OBO
Last edited:
SYO237
SyTy Registry
Re: Parts fer sale @ CARLISLE
Selling my AFCO front/rear shocks and front springs. The shocks probably have 1500-2000 miles on them - they did one trip to BG with a few light autoX passes and one trip to Miami. They are single adjustable and have the correct bushings for the SyTy to bolt right up. I have only the front springs (NOT REARS), which are the 500#s. Springs have never been mounted due to not having the tubular arms. I have the plates and wrench to mount and adjust. The shocks are currently on my truck.
There is absolutely NOTHING wrong with these shocks. They are sweet. I am upgrading to a double adjustable coilover all the way around, hence why Im selling.
If you plan to attend Carlisle, I will be happy to get them off the truck before I leave and bring them with.
PRICE: $750 if you are going to Carlisle!
Otherwise, Im asking $800 shipped in the lower 48. Either way, still a hell of a deal on a full set of slightly used practically brand new AFCOs.
Selling my AFCO front/rear shocks and front springs. The shocks probably have 1500-2000 miles on them - they did one trip to BG with a few light autoX passes and one trip to Miami. They are single adjustable and have the correct bushings for the SyTy to bolt right up. I have only the front springs (NOT REARS), which are the 500#s. Springs have never been mounted due to not having the tubular arms. I have the plates and wrench to mount and adjust. The shocks are currently on my truck.
There is absolutely NOTHING wrong with these shocks. They are sweet. I am upgrading to a double adjustable coilover all the way around, hence why Im selling.
If you plan to attend Carlisle, I will be happy to get them off the truck before I leave and bring them with.
PRICE: $750 if you are going to Carlisle!
Otherwise, Im asking $800 shipped in the lower 48. Either way, still a hell of a deal on a full set of slightly used practically brand new AFCOs.
dgoodhue
BuSTeD 4.3
Re: Parts fer sale @ CARLISLE
If it's the correct color, i am interested. I am not going to Carlisle through.
If it's the correct color, i am interested. I am not going to Carlisle through.
Baythan
SY2TY2SY2TY
Re: Parts fer sale @ CARLISLE
There's a chance I actually bought if from you! I can't remember. :dunno:
I won't have my hands on it until Carlisle. Will let you know.
There's a chance I actually bought if from you! I can't remember. :dunno:
I won't have my hands on it until Carlisle. Will let you know.
Syclone#2231
New member
Re: Parts fer sale @ CARLISLE
Have a few parts:
Front and Rear differential from a Syclone (70k mile) Thought one or the other wasn't working properly... (transfer case was bad)
Also Transfer case (needs rebuilt) $290
thanks
David
Have a few parts:
Front and Rear differential from a Syclone (70k mile) Thought one or the other wasn't working properly... (transfer case was bad)
Also Transfer case (needs rebuilt) $290
thanks
David
Slyclone
Well-known member
Re: Parts fer sale @ CARLISLE
I have a bent front rim as well as a original radiator support with correct syclone vehicle emission control information ( VECI) label in tact as well as emission hose routing diagram.
Just putting it out there. have a bunch of stuff I need to get rid of.
I have a bent front rim as well as a original radiator support with correct syclone vehicle emission control information ( VECI) label in tact as well as emission hose routing diagram.
Just putting it out there. have a bunch of stuff I need to get rid of.
Attachments
dgoodhue
BuSTeD 4.3
Re: Parts fer sale @ CARLISLE
It wasn't me. I tried to buying a NOS jack cover and screw from warmpancakes but it got lost. I was going sell you the screw.
It wasn't me. I tried to buying a NOS jack cover and screw from warmpancakes but it got lost. I was going sell you the screw.