Search results

Testing is finally done, few last minute tweaks to design. The performance of this kit has exceeded what I expected for ride quality and performance. It does BOTH. I just received production pieces today for the first 5 kits. 3 are already spoken for and welding and assembly will start this...

I have had this design in my mind for several years. The original solid motor mount design I did back in 2000 and it evolved into a 2 stage requiring both a new frame pad and solid mounts. Being solid mounts are the norm now, it made sense to just redesign from scratch and just make a solid...

Need a set of front spindles, anybody got a set laying around?

We just finished the prototype and mockup of the syclone specific rear suspension kit. Testing will start shortly with many miles and abuse on the test truck before we move into production. One of the big challenges of the syclone -vs- the typhoon 4 link we designed is the gas tank location. The...

Have a stock turbo in good used shape. $230 to your door in lower 48 states. Also have seats from the corvette I wrecked. C5 sport seats, power, in 8 out of 9 shape. no rips or tears, 1 scratch. I have a ton of other C5 parts available also. rear fascia I also happen to have a bunch of...

As many have figured out I have not spent much time in syty land as of recently. Lots of reasons some good, some life adventures we all face. With that said my spare time to develop and produce the select few JSM parts (crossmembers, torsion delete, and the 4 link ty rear kit) is just not...

Dave alwine and the crew from alwine racing is here in Denver with the top fuel motorcycle. Won't be making a pass today, but tomorrow will be busy. If anyone is at bandimere stop by and say hello. We are about starting line position in pits.

I have a few people asking for crossmembers, so with interest up and a small window before we start rear suspension stuff I am going to make a batch of them again. Either version $220 shipped. If you live on a cool island, in the remote northern wilderness, non US, etc slightly more. Be...

I have a 3" stock turbo DP, never been ran or installed, but it is built from the last pieces I had laying around and isn't perfect. 2 areas to know about, will not affect function. When the upper section was flared the stainless cracked, it has been welded back with stainless and ground...

anyone have a used ostrich laying around they don't need?

This is a water/air twin turbo intercooler. Mounts where stock lower CAC is mounted, has inlets on each side, outlet in center going up where hood latch is. (i ran hood pins but you could rework pipe to use stock hood latch) These are Bell intercooler cores so not some cheap ebay stuff...

Basically a brand new convertor, driven for 15 miles truck became a big project that was later abondoned. I would assume ~2800 rpm stall. $475 will land it on your door step in the lower 48. I also have the fresh transmission this came from. Derale pan, billet servo are known items. A...

Dash out of low mile 93, I would rate this a 7 in condition has some surface microcracking of surface but no major cracks near defroster that is common. I believe a fresh coat of plastic die would solve it all, but I have not done that. $200 + shipping Last torsion bar delete I have left from...

For those that went to shindig, they got to see first hand a truly bolt in 4 link for a typhoon on a running/driving truck (well until friday night it ran). Hardman and myself are very happy with how it has turned out, we had hoped to get some good drag numbers at shindig but someone water...

I have just about every part minus seats and carpet for a 93 typhoon that I will be parting out. 34k Miles on everything. White/White. No rust, everything listed is in excellent shape as it should be with miles. Cladding: Front Arcs $250 each (pending sportmachines) Front Bumper $500 Rear...

Set of 8 #84lb injectors, approx 5k miles on them. $275 to your door. Holley Fuel Injection Intake with 90 deg Elbow and Fuel Rails. $400 to your door. GT35 Turbo's (qty 2), bought from Precision, .65 A/R exhaust housings. Good for ~500hp each. $900 each, $1700 for pair

So several people have been asking for them for many years now. Today was the day we designed up the cross-member and fixtures for a torsion bar delete. I will have some cad pictures this week as I do the final design on the laser flanges. Pictures of the prototype won't show the final product...

I have parts on order to build one already. While I am at it I have material to build 2 more if anybody needs one. GP price was $220, normal price is $240 doing them 1 at a time like this. This includes shipping. paypal is ty1295@gmail.com just be sure in paypal to let me know what version...

I have a 700r4 here with 15 miles since it was built by Brian Hartman a few years ago. Comes with convertor, over $6k was spent on this rebuilt to make it the "best possible". Installed, driven 15 miles and truck was parked for many years. Bad part is I don't have any build details or...

Doing a brake upgrade on my 63 nova, had a set of camaro calipers/brackets here for it when I read on the nova forum that C5 calipers will bolt up, being I had a nicer set of C5 calipers around also I gave it a shot. Works perfect. Use camaro pads, rotors, but C5 calipers. Thought others...