Search results

275.00 plus shipping bought it from a board member and never installed it

complete meth inj system from cooling mist tank ,16' braided line hi pressure pump vericool controller smart injection controller with egt probe palm pilot for data recording and screen viewing it will need whatever size nozzle you will need ,cant find the ones that came with it 225.00...

still in his packaging a lower stock cooler replacement 275.00 plus shipping

looking to sell my 93 white on white ty motor is stock and tranny was rebuilt by previous owner. 82000 original mi previous owner removed roof rack and repainted roofline i have owned it since 06 and put rpm stage 1 replacement turbo on it and ultimate chip truck runs good and looks great...

taking the ty to the track cause the racecar is not done , just wondering what would be the best fuel choice for stock motor with rpm stage 1 turbo upgrade and ultimate chip

new rpm accufab fuel pressure regulator never used , i assumed my truck didnt have one when i bought it so i ordered it and when i went ti install it there was already a adjustable one on it 100.00 includes shipping(in us) greddy e-01 profec boost controller...

just got the sexy out of storage and got it home so i could install the ultimate chip i got this winter . went on UC website to check install instructions just to be sure , i noticed that the chip i have is for 50lb injectors . will it affect it much if i still have the stock ones in it and if i...

ok i put a new plentum gasket in,and replaced a couple suspect vacuume hoses put everything back together ran like shit at idle until i unpluged the map sensor ran perfect thought maybe bad sensor so i replaced it with a msd 3 bar out of my racecar -same result so i put my msd 2 bar in and it...

stock motor had stock turbo and i put a dequick a2a and went from 22 psi to about 12 psi upgraded to a rpm direct bolt on turbo with 40 more hp . still only makes 15 psi , so i thought all the extra a2a tubing was causing the low psi , i put the stock a2w back on and still 15 psi . greddy pro...

Putting stock intercooler back on which line goes to the pump side top or bottom off of exchanger?

where is the best place to get them?

got my new stage 1 turbo/wastegate from rpm today looks awsome but no instructions what do i do with the coolant lines ?cap them

should there be any up and down play in the impeller on a stock turbo. i was checkin things over and noticed the c- clip that holds the housing on had worked its way out so i remover to check for damage , no visible but the impeller moves up and down and i am pretty sure its not supposed to

has anyone expirienced a solid pedal after strong acceleration where you have no brakes what so ever for 15-20 seconds after you let off and then they are fine? what causes this and any way to fix it?

i was hoping to have more time to try and find some of the mn ty guys but when i showed up at the dyno they tild me my exhaust wouldnt pass tech so i drove back to my trailer and modified it to pass if you missed it here is a link to it on you tube http://www.youtube.com/watch?v=9-KKQ6XjmYU...

on my way home friday i saw a white on white ty ,lowered with some nice aftermarket wheels in maple grove MN

i was installing it and went to pull the connector for the controller apart and the wires on the hookup side pulled right out , there is only 2 wires in this connector so i can probobly just cut the other side off and put a new connector on it but i dont know which wires go to each other if...

i was installing it and went to pull the connector for the controller apart and the wires on the hookup side pulled right out , there is only 2 wires in this connector so i can probobly just cut the other side off and put a new connector on it but i dont know which wires go to each other if...

does anyone know what size the stage 3 bolt on turbo from rpm is ? And what are the differences between that and the pte 63 and the 60-1 turbo kit (besides price). I am running a stock motor :turbo:

was wonderin if anyone has run abullseye turbo before they claime its direct bolt on no new d-pipe required just curious http://www.timsturbos.com/TO4EB_57_trim.html