Search results

I have a set of Eagle Rods with SRP pistons on top. The truck never left my driveway with these in the engine due to a cam degree issue. Perfect condition, aside from some carbon on the top and slight scuffing on the skirts. ASKING $700 FOR THE SET

Colorado area, Here is the craigslist posting. http://denver.craigslist.org/pts/1330680667.html I have been out of the SyTy scene for awhile now and just need it gone! Thanks, Rob DONT MESSAGE ME ON SYTY.NET, I WONT GET IT. USE THE CRAIGSLIST LINK OR CALL.

Anybody know? Thanks, -Rob

I was on ebay looking for MSD 6A ignitions and came a across a MSD 6BTM that was just listed like minutes before I looked at it (still had 6d, 23h left). It was priced at $35 BIN because the timing adjustment knob had been cut from the harness. I emailed the guy (99.9% positive feedback) and...

What do you guys that did the ABS delete do with all the wiring that is left over? Should I just trim it back into the loom and cap the ends of the wires? Also, the AC and Boost control solenoid wires are fugly and I dont need them any more. Is it okay to trim them back as well? And the Cruise...

Alright, so, three steps forward, two steps back. I installed my Custom steering shaft that I got out of a 1992 Jeep Wrangler (I cut about 7 inches out of the middle), its got universal joints and no rag joints. I deleted my ABS without the help of the ABS delete kit and I installed my ATR...

My ATR headers are not fitting on the driver side because of the loop in the brake lines near the power steering shaft. Anybody that has ATR headers want to enlighten me on what to do? I tried moving it around and bending it out of the way, but I cant seem to bend it far enough. I really just...

I was disassembling the front of the motor today getting ready to put the ATR headers in, and noticed I am probably going to have to do something about the bracket that bolts onto the driver side exhaust manifold from the PS pump. I didn't look closely because it just got dark out, but what is...

Someone should develop a plate that bolts between the upper and lower manifold that injects methanol directly into each port. Just like a plate nitrous system on carbies... That would rock. -Rob

Does the ATR cold air box work with the PTE turbo and cobra head elbow? Just wondering if everything lines up or if im gonna need to ditch the box to run the PTE. -Rob

If I am currently running 13.2:1 air fuel ratio (@15psi) on my stock 17c, utilizing Ultimate 50# chip for fueling, and I change my turbo to say a TE60, how does the computer know that the air mass is much larger at the same pressure with the bigger turbo? Im scared of leaning out when I swap...

Sorry if this is already answered or posted, but wondering if you ever got the Ty exhausts done? I got money burning a hole in my pocket for one! -Rob

haha..J/K. Just thought I would show off my engine bay and list my mods. ATR Cold air induction box Gay little stock turbo that runs out of breath at 3500 RPM. "Custom" intake pipe with Knock off Tial BOV Big intercooler from somewhere, I think its Conleys or ATR BBK Throttle body Ported...

Anybody from Prescott Arizona? I just moved here from Colorado Springs, and I haven't seen a syty since. Anybody close? Im bored up here, and dont have much to do right now... -Rob

I used the search, and nobody seems to know why this code comes on intermittently, Can somebody definitavely tell me what causes this code???? The memcal? I have a brand new knock sensor, torqued down to 14ft pounds, a brand new MSD distributor with brand new ICM, so the Memcal with the ESC...

Why doesn't anybody use these on our trucks? I used the search, and it only comes up with THREE posts, none of them informative, and one of them being mine.... Whats the deal? It has a nifty boost retard feature that allows you to retard timing 1 to 3 degrees per poound of boost if you start to...

I read somewhere that on vortec heads, the retainers crash down onto the valve stem seals with more than .465" lift? Is this true, and how do you cure the problem? My vortecs are at the shop being assembled as I type and I need to know if I need to call off the build, before its all assembled...

How much hotter than a stock camshaft is this, and would it be worth sticking in a stock type rebuild? I've got this cam and my stock one lying here, and I am debating if I should throw this one in my rebuild. The engine will sport stock heads, and stock rods with speed pro pistons, I dont want...

I would like to thank everyone who offered so much help and advice on the problem I was having with my truck. The answer has been found. Its me. Im stupid. That was/is the problem. Okay, well its part of the problem. 1: Early in my troubles my valve lash was out of adjustment. That was part of...

I need a nice clear picture of the ATR exhaust for a typhoon and a syclone, before it is on the truck. Does anybody that purchased one before ATR went out of business have a pic they took when they got it, or can anybody point me to a picture of them? Thanks, Rob